PETG
American Made Plastic Sheet
Co-Polyester Sheet – Vivak® – Spectar®
(Searching for PET / PBT Polyester Sheet instead? Click Here)

Why use PETG:
- it has very good clarity
- has excellent Bending and Vacuum Form properties
- has great ease of fabrication
- excellent impact strength
**
This materials is…
an excellent material for fabrication of POP Displays, Forming of 3-d parts, and bending.
- Excellent fabrication
- Low cost material with high impact strength
- Easy to form, punch, rivet and cut
- Paintable, printable, and silk screens well
- Excellent for indoor POP displays (not UV stable)

![]() | ![]() |
![]() | ![]() |
Some popular applications are:
- Formed, stamped, or punched parts
- High impact parts like shields and guards
- Signage requiring three dimensions, painting or silk screening
- Break resistant displays, shelving, map covers or bent parts
- Router cut, saw cut and laser cut parts
Availability:
Sheet and Film:
Sheet: .020″ – .500″ Thickness in 48″ X 96″ sheets
Film: Special order – please call with your requirements
Typical Resin Properties:
General Property | ASTM Test | Typical Value |
Specific Gravity | D792 | 1.27 |
Tensile Strength Yield | D638 | 6,990 |
Tensile Modulus | D638 | 301,000 |
Izod Impact – Notched | D256 | No Break -300 in/lbs. |
Heat Distortion Temp. | D648 | 145ºF |
Viscat Softening Point | D1525 | 180ºF |
Co. Thermal Expansion | D696 | 3.0X10-5 |
![]() | |
![]() | ![]() |
![]() | ![]() |
These Properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed or implied.